How to Build the Lad statue
When the idea of building a Lad statue came to me, I had no idea how to build it.
I did some online searching and found that I could build a wooden Lad statue with a wooden base.
This meant I had to build something with a sturdy base, something sturdy that would hold up when I put my foot on it.
In addition, it meant I needed to create a base that was as strong as the base of the Lad statues I had built.
In my mind, I envisioned the Lad Statue as a sort of wooden building block that would be useful when I needed it to support a building.
So, I decided to try building the Lad with wood, but with an extra piece that I called the Ladstone.
The Ladstone is a large slab of wood with a single piece of wood that goes on top.
When the Lad is put down, it creates a hollow inside.
When you put down the Lad stone, the bottom piece of the wood is pulled up through the top of the stone.
This allows you to create an “un-lid.”
This means that the Lad Stone is never directly exposed to the elements.
I was able to make the Lad a solid solid block of wood without creating any extra holes, and I also didn’t have to build a second base for the Lad.
To do this, I cut out the wood to length and added a piece of 1/2 inch plywood to hold it up.
The wood that was used to build the Lad’s base was also used to make a few decorative pieces for the statue.
The final piece that went on top of my Ladstone was a piece that was made from a piece I had in my basement.
I had this piece cut to the exact shape of the base that would fit inside the Lad, and the whole thing was painted a dark color to blend in with the LadStone.
I then cut a piece about the size of a pea to go on top and filled it with a little paint to make it look like it was made of gold.
I also glued a couple of pieces of foam to the inside of the statue, which helps hold the statue up when you place your foot on the base.
Then, I glued a piece to the base to give it some strength, and then I glued two pieces of wood to the sides of the piece.
I attached the legs to the pieces of the wooden base with some pieces of metal screws.
The whole process took me about an hour.
The LadStone was completed in about a week.
The piece of plywood and the pieces I glued to the outside of the sculpture were my main pieces of equipment.
The statue is about 7 feet tall and weighs about 5 pounds.
I used a 1/4 inch ply wood piece that measured 3/4″ by 2″ to make my base and two 1/16 inch ply boards that were 1/8″ by 1/32″ to form the base for my LadStone, and a 4 foot piece of ½” plywood that was 1/5″ by 3/8″.
This makes for a total of 18 feet long.
The most difficult part of building the statue was building the base, because there were no holes or cracks in the wood.
There are a few other things to note here.
First, the Lad does not have a lid.
The base has no lid, so you have to keep your foot off the base and on the Lad for the rest of the game.
When I put the Lad on, I kept my foot off my legs to prevent it from being pulled around.
I also used a piece with a peg to hold the Lad in place.
This peg is attached to the underside of the top piece of metal that is attached at the top to the bottom of the ladder.
The peg attaches to the top plate of the metal piece that is bolted to the ladder by a 2″ bolt.
If the ladder is pulled off and the peg is dropped, the base would fall on top or on the bottom.
The other thing to note about the Ladstones base is that the top and bottom pieces are connected to the back by a piece called a “tape.”
This tape is a small strip of metal attached to a small metal bar that goes over the top part of the lid.
If a hole is drilled in the lid, the tape will go all the way around the hole.
This makes the Lad much more secure when you are using it as a base.
The tape also provides a much more durable way of securing the base when it is being moved around.
The statue is a nice, simple piece that can be used to display things or simply stand on.
You can see that the base has a hole at the bottom for a ladder.
It is also a nice place to put your head to display a picture.
You will notice that the ladder has a small hole that goes under it when the Lad sits down.
It looks like a little hole that would go